2.4GHz 4W Wi-Fi Signal Booster Range Extender
Product Description
2.4GHz 4W Wi-Fi Signal Booster Range Extender
This 2.4G WiFi
signal booster can amplify the transmitting and receiving power of 2.4G
wireless equipments such as router, Wi-Fi AP, ZigBee, wireless security cameras,
drones, UAV and other wireless-controlled equipment.
Its 4000mW with 36dB amp power can enhance wireless signal strength, increase the transmission distance and stabilize Wi-Fi signal reception.
 |
Universal compatible with 2.4GHz frequency transmitter and receiver and other 2.4Ghz wireless network/automation devices.
 |
Great Wi-Fi Range Extender with 4000mW
Amplification
Its 4000mW (36dBm) amp power can enhance wireless signal strength, increase the transmission distance and
stabilize signal reception.
 |
You can either use this Wi-Fi amplifier for all Wi-Fi internet, networking or home automation setup.
For example using it on base stations like WiFi routers, Wi-Fi access points, WiFi repeaters or on client stations like WiFi USB dongles or WiFi PCI cards.
Also great for UAV, RC toys and other wireless-controlled equipments.
 |
Premium Quality
This 2.4GHz Wi-Fi signal booster is made of aluminum enclosure with anti-interference
design. It is easy for just a plug-and-play hookup.
 |
Wide Power Voltage Range Support
This Wi-Fi signal amplifier supports a wide operating input power voltage from DC 6V
and up to 16V.
 |
- This 2.4G WiFi signal booster easily amplifies the transmitting and receiving power of 2.4G wireless equipments such as router, Wi-Fi AP, ZigBee, wireless security cameras, drones, UAV and radio-controlled equipment.
- IIts 4000mW (36dBm) amp power can enhance wireless signal strength, increase the transmission distance and stabilize signal reception.
- Great Wi-Fi range extender for all Wi-Fi internet, networking and home automation setup.
- Using it on base stations like WiFi routers, Wi-Fi access points, WiFi repeaters or on client stations like WiFi USB dongles or WiFi PCI cards.
- Also great wireless range extender for UAV, RC toys and other wireless-controlled equipment.
- Aluminum-alloy case with anti-interference design.
- Support a wide range of input power voltage for DC power supply from 5V and up to 16V.
- Easy plug-and-play installation.
- Standard: IEEE 802.11b/g/n (2.4Ghz mode only)
- Frequency range: 2.4 to 2.5Ghz
- Operating voltage: 6 to 16V
- Receiving gain: 10dB +/- 1
- Transmission gain: 13dB +/- 1
- Input trigger power: 3dBm to 20dBm
- Maximum output power: 36dBm (4W)
- Switch time delay: 1us
- Antenna length: 20cm (7.87 inch)
- SMA cable length: 25cm (9.84 inch)
- Booster size: 95 x 50 x 19mm (3.74 x 1.96 x 0.74 inch)
- Wi-Fi signal booster x 1
- DC power adapter x 1
- SMA male to male cable wire x 1
- 6dBi antenna x 1
