Premium 4-Way RF Coax Splitter Combiner
Product Description
This bi-directional coax TV Splitter/Combiner can be used for various TV setups.
It is ideal for CATV, antenna TV, satellite TV, surveillance CCTV and all other MATV operations.
This coaxial TV splitter combiner can be used to divide one coax signal from CATV, satellite TV source or antenna into 4 identical RF TV signals for further distribution among 4 TVs.
It can also work in the opposite way by combining multiple coax TV sources such as modulators, CCTV camera, cable box into one coax cable run for distribution among multiple TVs.
This bi-directional coax combiner/splitter provides broad bandwidth from 5 to 2400 MHz. Featured with low insertion loss with high isolation, built for excellent performance.
 |
1 In 4
Out
Coax TV Splitter
This
item can be used as a 1 in 4 out coax spliliter for CATV, satellite TV, antenna
or CCTV setup.
 |
4 In 1 Out Coax
TV
Combiner
This
item can also be used in the opposite direction as an 4 in 1 out RF coax
combiner for combining multiple CATV feeds, antenna feeds or satellite feeds
into one coax cable run for further distribution among multiple TVs.
 |
Wide Frequency Range Support
This unit supports a broad frequency range from 5 to 2400MHz. Most of the
coaxial TV setup and signals such as satellite TV, cable TV or antenna TV system can be handled by this unit.
 |
High Isolation
This CATV splitter and combiner provides high shielding isolation with low
amplitude attenuation so the combining coax TV signals will have no potential of channel interaction.
Each adjacent TV channel can be transmitted in stable quality with no noise or interference incurred.
Enclosed by tin-plated Zinc die-cast housing to prevent corrosion.
 |
This coax splitter/combiner is fully compatible with bothRG6 and RG59 cables.
 |
- Ideal for CATV, antenna TV, satellite TV, surveillance CCTV and all other MATV operations.
- Used as a 1 in 4 out coax TV splitter for splitting signal from a coax TV source into 4 duplicate ones.
- Used as a 4 in 1 out coax TV combiner for joining 4 coaxial TV signals into one for single coax cable run.
- Tin-plated Zinc die-cast housing to prevent corrosion.
- Shielded housing and high isolation with low Insertion loss and no interference.
- Excellent quality with full frequency range from 5 to 2400MHz.
- Compatible with both RG6 and RG59 cables.
- Balanced (equal loss on all ports) design.
- Light weight and compact size.
- All ports F-(f)connector,75Ohm
- Screening factor: 5 to 2400MHz >=100dB
- Low insertion loss, high isolation, perfect performance index.
- 75ohm, F-type connector design.
- Power passing 24V 0.8A(MAX.)
