Stereo RCA 3.5mm Audio Balun Extender Over Cat5/Cat6 Cable
Stereo 3.5mm Audio Balun Extender Over Cat5 Cat5E Cat6 Cable
This stereo audio over Ethernet cable kit allows you to send stereo L/R channel or mono sound up to 250 feet or 75 meters using a low-cost Cat5/Cat5e/Cat-6 twisted pair Ethernet cable.
This stereo audio extender kit is used in pair. Each pack consists of one transmitter and one receiver plus the RCA to 3.5mm adapter cables.
It allows users to connect from a stereo or mono audio source to
speaker, audio receiver, stereo amplifier at distance through using Ethernet
[Note]: the Ethernet cable used in the setup can not be mixed with networking equipments together. It needs dedicated Ethernet cable for point-to-point hookup.
Perfect and cost-effective solution for extending audio signal for longer distance transmission and for a nice and neat setup , which is a must for all professional installers. This audio balun/extender fits with various applications such as:
- Public audio/audio broadcasting such as air ports, train stations, retail stores
- Information kiosks or administrative consoles for control rooms and multimedia centers
- Tradeshows, hospitals, auditorium and command rooms
- Classrooms, training center and conference room
- Live stage events
The installation of this audio extender kit is super easy. It is all just plug and play by connecting Cat5, Cat5e or Cat6 cable between transmitter and receiver unit
No setting or configuration needed and no external power supply needed.
Long Range Audio Transmission
This stereo audio extender can transmit standard analog audio signal for over 250-feet(75m) cable run while maintaining audio integrity with the same clear and sharp sonic quality outputs all the way.
No signal loss, no noise and no signal degrading quality after the long cable run.
Low-Cost Cable Solution
Cat5/Cat6 twisted pair cables are widely popular, resulting in lower cost due to the mass production.
These types of cables are also easily to be customized at various length as needed, eliminates logistics problems of having custom length of audio cables made in advance.
Comprehensive Audio Hookup Support
This audio extender kit supports both RCA to RCA hookup and RCA to 3.5mm stereo mini hookups.
CAT-5 and CAT-6 twisted pair cables are more flexible than regular coax and RCA cables. They are easier to hide away in offices, buildings and behind walls for ultimate flexibility. Nice and neat setup is also a must for all professional installers.
- Perfect and cost-effective audio signal extension solution for transmitting composite audio signal and power over long distance using low-cost CAT-5, CAT-5e or CAT-6 network cable.
- Ethernet cables are easier to install and more flexible than other audio cables.
- Maximum signal transmission distance up to 250 feet or 75m.
- Twisted pair network cabling provides added protection against outside interference and increases overall signal transmission distances.
- Audio sonic quality will be retained all the way the same as the original audio input.
- No signal loss and no degradation after the long cable run.
- Supports both RCA to RCA hookup and RCA to 3.5mm stereo mini hookups.
- Passive circuitry with self bus-powered so no external power supply needed for the operation in both transmitter unit and receiver unit.
- Fully plug and play.
- Supports both stereo and mono audio.
- Audio Input Connector: RCA male x 2 Or 3.5mm male x 1 via using the adapter cable included for L/R channel
- Audio Out Connector: RCA male x 2 Or 3.5mm male x 1 via using the adapter cable included for L/R channel
- RJ45 Connector: 2 ( 1 for transmitter and 1 for receiver unit)
- Max Transmission Distance: 250 feet
- Bandwidth: 10 Hz to 50 kHz +/-3 dB
- Operating Temperature: -10C ~ +50C
- Environment Humidity: 0 ~ 95%
- Wire Type: Category 5, 5e, or 6 of twisted pair type
- Operating Temperature: -10°C to 70°C
- Dimension: 0.5"(L)x0.5"(W) x1"(D)
- Stereo audio transmitter + receiver
- 2 of RCA L/R female to 3.5mm audio adapter cable