Wireless IR Remote Control Range Extender Kit
This wireless remote control sender kit provides users with an ideal solution for home AV setups that have audio video equipments etc. located behind closed doors, cabinet, closet or in another room, you have the freedom to move throughout your home and control those audio video sources.
This remote control extender is comprised of two units - one local IR extender, which accepts the incoming IR signal from the remote control and wirelessly transmits it to the 2nd IR extender unit(receiver) positioned near the electronic device to be controlled at distance.
This remote control range extender kit gives users the ability to control A/V devices for out-of-sight setup such as from cabinet or another room, adding flexibility or streamline your home audio video applications, without having to stay within range to control the equipments.
The installation is very easy with configuration needed at all. The IR remote transmitter unit should be close to the user so the remote controller can aim toward the transmitter for broadcasting in RF frequency for the receiver's location.
And the paired IR receiver should be placed at the remote location for connection with the A/V source devices to be controlled such as DVD player, cable box and so on.
At last plug the IR sensor wire into the receiver unit and have the mouse tail end of the sensor wire stay closed or simply affixed onto the front panel of the A/V equipment to be controlled with a tape.
Then the IR receiver will emit the remote control signal through the connected IR sensor dongle toward the controlled device.
Solid RF Signal Pass
This wireless IR remote control extender kit enables you to extend the operation range of your existing remote controller to greater distance. It uses the solid RF frequency that can pass through walls, doors, ceilings and corners.
Long Range Transmission
Its maximum transmission distance can be reached up to 100 meters or 300ft under unobstructed circumstance. If there are walls, floors or other barriers for the RF signal to pass through, the effective range will be reduced accordingly.
Retractable And Adjustable Antenna
This IR remote extender kit adopts the external antenna design, far better than all other comparable kits with internal antenna hidden inside the unit.
The exterior antenna is retractable. It can be extended up to 8 inch tall for greater reception and longer range of broadcasting for its paired receiver.
The antenna angle can also be tilted and adjusted for best result.
Flexible Device Control
This IR remote extender can work with all video audio source devices such as cable box, satellite receiver, home theater system, stereo amplifier, radio tuner and so on.
The IR receiver works through its IR sensor dongle, which allows user to easily hide the receiver unit and the IR electronic devices behind the TV or inside the A/V cabinet. The remote control extender may also be used in CCTV systems for remote control of DVRs located in different room than the site of the operator.
Easy Extender Wire Extension
The IR extender/sensor wire used in the receiver unit has a 2.5mm "mono" plug. If you need to extend this extender wire for longer distance, you can simply use longer 2.5mm audio extension cable for much longer distance.
- Extends IR remote control signal and stays in control of consumer electronics device that is out of sight or from greater distance.
- Allows you to place your audio and video equipment anywhere you want as long as it is within the transmission range.
- Converting the IR remote controller signal into solid RF signal that can pass through walls, doors, ceilings and corners for longer distance.
- Maximum transmission distance can be up to 100 meters or 300ft under unobstructed circumstance.
- High-gain antenna with retractable and extendable up to 8 inch tall for great reception and longer range.
- IR senor wire dongle can be easily extended using 2.5mm audio cable.
- Works with most DVD players, home theater systems, satellite receivers, cable boxes, stereo receivers, audio video receivers and any other infrared remote control operated devices.
- Mini size with sleek design, well fitted with modern home theater design.
- Energy saving with very low power consumption.
- Power Supply: 110V-240V AC input with DC 12V 150mA output
- Transmission Frequency: 433.92 MHz
- IR Transmission/Reception Angle: +/- 15° horizontally/vertically
- IR Carrier Frequency: 30 to 60 Khz
- Max IR Remote Range: 20 feet or 6 meters
- Cable Lengths For Extender Wire: 3ft, 5ft and 6.5ft.
- Max Transmission Distance: 300ft or 100 meters in clear line of sight setup
- Max Power Consumption: 1.8 Watts for each transmitter/receiver unit.
- Dimension: 4"(L) x 4"(W) x 2.5"(H)
- Power Gain: 10 dBM
- Input Sensitivity: -85 dBm (min)
- IR remote transmitter/sender unit
- IR remote receiver unit
- Power adapter x 2
- IR sensor dongle
- User manual