15Khz RGB CGA YUV Component Video YCbCr to VGA Converter Scaler

The video displays for the older RGB sources are quite hard to get nowadays. If users want the benefit of using LCD flat panel display for their legacy RGB source, this converter provides the right solution for converting the 15Khz RGB type signals to modern VGA interface signals. Glitch-free conversion with high resolution output display of sharp frames and fine pixels.

This RGB to VGA converter scaler unit upgrades the older 15Khz RGB video signals from sources like arcade game boards to high-resolution VGA with progressive scan output for use with TFT monitor, LCD panel, projector or HDTV set with VGA input. 

Fit with both 4:3 And 16:9 Wide Screen VESA/VGA Displays
This RGB to VGA converter is featured the only product in the market that supports true 16:9 output with native wide screen resolution at 1366x768 pixels  for LCD TV or LCD/TFT monitor size larger than 17" or 1024x768 pixels output for standard 4:3 CRT monitor VESA displays.

The unit converts the signals of a RGB source in a format that can be shown on both: a traditional CRT with VGA connector as well as on a flatscreen LCD monitor. It digitizes the incoming video signals and up converts them with perfect image output quality.

Advanced 3D Motion Adaptive De-interlacing
With the motion adaptive de-interlacing technology, this unit easily converts the interlaced RGB signals into progressive ones (scanned every line). Users shall find pictures much less flickering with more graphical presentation. This unit also adopts a variety of technologies including automatic 3:2/2:2 file mode detection and non-linear scaling to enhance the picture quality for sharp and clear output.

480i/576i Component Video to VGA Converter
This RGB converter also supports 480i or 576i YUV or component video YCbCr signals from RGB sources like DVD players, satellite set top boxes, media players and all major video game consoles including:

• Gamecube at 480i/576i mode

• Xbox and Xbox 360 at 480i/576i mode

• PlayStation 2 PS2 at 480i/576i mode

• Nintendo Wii at 480i/576i mode

The interlaced component RGB signals will be converted into progressive scan  type VGA or RGBHV signals for high resolution presentation and scaled up to 1024x768 pixels or 1366x768 pixels to fit with all sizes of  VGA monitors, LCD flat panels or LCD TV displays with VGA inputs.

15Khz RGB CGA to VGA Converter
All the legacy RGB devices with analog outputs at 15Khz horizontal plus 50/60Hz vertical frequency range can be up converted nicely at high resolution on CRT/LCD/TFT monitor, projector or LCD TV via VGA connection.

like the CGA from arcade video games  can also be displayed 

The CGA outputs from those arcade game board or the older Amiga computer  can now be displayed using a PC VGA monitor or TFT  LCD monitor. All new design for low picture noise and detects wider range in game board timing.

This converter supports all major RGB outputs from the following gaming machine PCBs and all other legacy computer video sources:

• Enhances analog RGB signals to high VGA resolutions for display on any computer CRT monitor, LCD/TFT flat display panel or projector.
• The only product in the market that supports true 16:9 output with native wide screen resolution at 1366x768 pixels for LCD TV or LCD/TFT monitor size larger than 17". 
• Play arcade video games at high resolution on CRT/LCD/TFT monitor, projector, LCD TV or HDTV via VGA connection.
• Supports all RGB signals with 15Khz(H)+ 50/60hz(V) type input or YCbCr component video at 480i/576i inputs.
• Supports RGB inputs from all major game consoles including Gamecube, PlayStation 2, Nintendo Wii, Xbox and Xbox 360.
• Supports legacy computer devices like Amiga, Atari and so on.
• Supports 16-bit and 24-bit color depth.
• All new design for low picture noise and detects wider range in game board timing.
• Enhance standard definition video at 480i/576i resolution from DVD player, DVR, satellite receiver or video game consoles to progressive scan high VGA resolution for display.
• Auto detection of RGB inputs including RGsB (sync on G), RGBS, RGBH/V and RGBH+V composite sync with sync level above 2 vpp, 75 Ohm.
• 2 selectable Input selections: CGA and RGB Component video input.
• 3 selectable VGA output resolutions: 640x480 pixels, 1024x768 pixels and 1366x768 pixels.
• Automatic 50/60 Hz scan rate conversion to ensure sharp and glitch-free picture display on the monitor or projector.
• Automatic 3:2/2:2 file mode detection.
• Supports both standard 4:3 and 16:9 widescreen VGA & VESA displays.
• Supports sustaining contrastive modification.
• Glitch-free conversion with high resolution output display of sharp frames and fine pixels.

• 15Khz RGB to VGA scaler
• Power supply
• User manual
• D-sub 15-pin VGA to 3 RCA adapter cable for component video input

For those 15Khz RGB devices with DB 9-pin output, VGA, we suggest you to order the proprietary adapter cable from us to avoid the the problem or customize one yourself  with our specification. Please contact our sales team or click here to order it from our web site directly. 

Or you may customize your own adapter cable for your RGB devices. The following diagram shows the corresponding pin-out assignment from 15Khz H/60Hz V RGB output to the 15-pin VGA input of our model AV-1 converter.

A correct 9-pin to 15-pin cable can be built as follows:

 9-pin F         15-pin M
     -------         --------
      1,2,6  ---------  5
        3    ---------  1
        4    ---------  2
        5    ---------  3
        8    ---------  13
        9    ---------  14